Showing posts with label chevrolet corvette stingray. Show all posts
Showing posts with label chevrolet corvette stingray. Show all posts

Wednesday, 29 May 2013

Veyron and C7 Corvette join cast of Transformers 4

 


Like the Fast & Furious franchise, the Michael Bay-directed series of Transformers movies has become known as much for its bad acting as its impressive lineup of cars. As filming just started for Transformers 4, Bay's website has confirmed two new cars for the next installment as well as a makeover for everyone's favorite tractor trailer hero, Optimus Prime.

Joining the cast of T4 are a "race-inspired" Chevrolet Corvette Stingray and a Bugatti Veyron Grand Sport Vitesse. While Bay's website did not supply names for either car, Bugatti is reporting on its Facebook page that the Veyron will join the Autobots. Speaking of the good guys, top Autobot Optimus Prime is getting an all-new body based on a Western Star with a gaudy appearance that was seemingly inspired by Trick My Truck – right down to the six smoke stacks and side pipes!

2014 Chevy Corvette Stingray 6.2L LT1 rated at 460 hp, 465 lb-ft



Chevrolet has officially dropped power figures for the 2014 Corvette Stingray. The sports car's 6.2-liter V8 can crank out up to 460 horsepower at 6,000 rpm and 465 pound-feet of torque at 4,000 rpm. Most of the torque, up to 316 lb-ft, is available from just 1,000 rpm, and wide open the LT1 V8 produces just 5 lb-ft less than the outgoing LS7 in the Z06. Mercy.

Using the standard exhaust, the engine yields 455 hp and 460 lb-ft of torque. Chevrolet estimates that's good enough to get the 2014 Corvette to 60 miles per hour in under four seconds. Even with all that thrust on hand, Chevy says the LT1 is more efficient than ever. Active Fuel Management, direct injection and variable valve timing help cut emissions by 25 percent.

In addition, engineers threw a spate of advancements at the mill, including four-into-one exhaust manifolds, a new intake manifold design and an oil system with piston squirters to keep the cylinders cool under hard use. The system also allows for an available dry-sump oiling system.

Source :